Description
914/30902 – FLANGE YOKE X 1, UNIVERSAL JOINT X 2, 914/70045 – END YOKE 1″ BORE-JCB BACKHOE – PUMP DRIVE SHAFT 4 (PART NO. 914/60041 or 914/44500)
- YOU ARE BUYING THE FLANGE, UNIVERSAL JOINTS X 2 AND END YOKE WITH 1″ BORE ONLY TO REPAIR 914/60041 OR 914/44500 SHAFT as seen in the cover image.
| Flanges | |
| Holes | 4 |
| Series | 1310 (1.062 x 3.219) |
| (OD) | 4.625 |
| Pilot | 2.750M |
| (H) | 1.375 |
| (X) | 2.410 |
| (Y) | 2.873 |
| (Z) | 3.750 |
- U-Joint Series 1310 Universal Joint Retaining Width 3.469
- Universal Joint Bearing Diameter D 1.062
- Flange Diameter A 4.625
- Bolt Circle Diameter B 3.750
- Horizontal Distance Between Holes (center to center) 2.410
- Vertical Distance Between Holes (center to center) 2.873
- Bolt Hole Diameter .438-D
- Bolt Hole Quantity 4.000
- Pilot Diameter (M-Male, F-Female) C 2.750M
- Centerline of Joint to Flange Face G 1.375
| End Yokes | |
| Series | 1310 |
| (D) | 1.062 |
| (L) | 3.219 |
| (P) | 1.000 |
| (R) | 2.000 |
| (S) | 2.562 |
| (X) | 0.250 |
| U-Joint Series | 1310 | |
| Bore Diameter | P | 1.000 |
| SAE Keyway Width | X | 0.250 |
| Hub Diameter | R | 2.125 |
| Universal Joint Retaining Width | E | 3.469 |
| Universal Joint Bearing Diameter | D | 1.062 |
| Centerline of Joint to End of Hub | S | 2.562 |
| Imperial Universal Joints | |
| (D) | 1.062 |
| (L) | 3.219 |
| Type | 2 |
- 5-153X Greaseable Univeral Joint
- Grease Fitting in body of u-joint 1310 series
- A 3.219 inches (3-7/32 inches)
- B 3.219 inches (3-7/32 inches)
- C 1.062 inch (1-1/16 inch) diameter
- D 1.062 inch (1-1/16 inch) diameter Outside snap rings
- Part Number: 5-153X
Reviews
There are no reviews yet.