1350 PINION YOKE STRAP STYLE DANA 44 TJ YJ XJ CJ JEEP OEM SPICER PART

$228,00

Part Number:

K1622

Out of stock

Description

1350 PINION YOKE STRAP STYLE DANA 44 TJ YJ XJ CJ JEEP OEM SPICER PART

a,a:hover,a:active,a:visited {color:#0d93d7 !important}

1350 PINION YOKE STRAP STYLE DANA 44 TJ YJ XJ CJ JEEP OEM SPICER PART


OEM Dana Spicer Pinion Yoke 3-4-5761X STRAP Style, This Pinion
Yoke will fit a Dana 30,35 or 44 Front or Rear Axle That is
26 Spline.

 

      This listing includes all the parts as shown in the Cover image to fit a Dana 44 Front or Rear Axle:

  • Pinion Yoke Strap style 3-4-5761X

  • STRAP Kit 3-70-28X

  • Dana 44 Pinion Seal 44895

  • Pinion Nut 30185

  • U-JOINT 5-178XS

MOST Stock Jeep
U-Joint Size Is 1310 Series this is not an O.E.M Replacement This Is a Upgrade
to A Heavy Duty 1350 Pinion Yoke. 

  • 26 Spline
  • Strap Style – Straps are
    included
  • 1350 Series
  • Will fit Dana 30, 35, or
    Dana 44 axles
  • Can be used on  XJ, TJ,
    YJ and CJ Model Jeeps as well as other applications with 26 splined
    pinions.
  • Note when
    using this in a Dana 35 you will need to use Dana Spicer pinion Seal
    40554 




End Yokes
Series 1350 (1.188 x 3.625)
Splines 26
Major Dia 1.146
(R) 1.550
(S) 3.000
(Q) 1.500
Type 3

Imperial Universal Joints
(D) 1.188
(L) 3.625
Type 2

  • Cap Diameter: 1.188″
  • Distance between snaprings: 3.625″
  • Spicer: 5-178X
  • Precision: 331
  • GMB: GU2200
  • Rockwell/Meritor CP178X
  • Borg Warner 114-635
  • Neapco 2-0053
  • Borg Warner 114-10HD, 114-578
  • Chrysler 1516854, 2298823, 4797307, 4797307AB
  • Ford 4OT7039A, 01T7039, B5T7039A, B5TZ4635A, C1TZ3249A, C5TZ4635E, F5TZ4635A, F81Z4635BB
  • General Motors 374246, 609515
  • Toyota 043710C094, 043710C080

Dana Spicer 44895 30/44 Diff Pinion Seal OE: 04746772

    Dana Spicer 44895 30/44 Diff Pinion Seal OE: 04746772

  • Spicer 44895
  • Dana 30/44 Diff Pinion Seal OE: 04746772




U-Joint Series  

 

1350/1410  

Type  

 

Bearing Strap  

Bolt Thread  

 

.312-24  

Bolt Center-Center distance  

 

1.806  

U-Joint Cap Diameter  

 

1.188  

Bolt Length  

 

0.750 

30185 Differential Drive Pinion Gear Nut

30185 Differential Drive Pinion Gear Nut:


  • Self Locking         Yes
  • Thread Size         0.750-16
  • Hex                 27.890 mm
  • Thickness         14.275 mm
  • Flange Diameter 28.135 mm
  • Shaft Not Torque (Ft/Lbs) 400 lbs
  • 30185S





 

ABOUT THE SELLER

Welcome to our family-owned business, proudly serving our community for over 30 years. Our journey began with a simple yet profound mission: to offer high-quality products that embody both excellence and integrity. Over the decades, we have forged relationships with trusted suppliers offering quality and service. We are deeply committed to upholding the values of hard work and quality that have been the cornerstone of our business from the very beginning. Thank you for being a part of our story.

Spares we sell are my passion.

Payment terms

  • We accept Paypal
  • It is safe and fast, also recommended by Ebay

Shipping terms and conditions

  • All orders are shipped out within 24 hours of purchase.
  • As soon as the item has been shipped you will receive an update email with the tracking details via ebay.
  • For international orders please contact us for the best shipping rate to your location.

Returns Policy

  • Returns:
    We aim to provide you with the best possible purchasing experience.
    Please take the time to read through our policy before purchase:
    If you are unhappy with your purchase for any reason, you can return it to us in an unused condition and in the original packaging.
    If returned within 30 days of the purchase, we shall give you a refund or an exchange subject to the following conditions:
    The refund/exchange will not include return postage/shipping costs.
    Always contact us prior to returning your purchase and we will usually require a picture/video for us to understand the reason or problem you had with your purchase.
    Please provide us with as much detail as possible for us to fully understand what went wrong. We endeavor to provide tried and tested products to our buyers and we use the pictures/videos to either enhance our product or to prevent these issues from re-occurring. All returns require tracking details to be sent to the sales representative handling the query/return. Any parcel returned without us receiving tracking details from the buyer shall be rejected. Our listing information will usually have pictures/measurements/sizes/part numbers that will ensure that you are purchasing the correct part.
    We will not be responsible for the following circumstances:
    Our parts must be installed by someone qualified and with sufficient knowledge to correctly install the part that was purchased.
    CV Joint Boot kits and rubber boots – carry no warranty.
    Complete CV Joint Kits that have not been sufficiently greased prior to installation or if the rubber boot has been damaged during installation shall void the warranty and no refunds/or returns will be accepted. Driveshafts that have been installed into vehicles that have been raised or modified will void the warranty and the return will not be accepted.
    We will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible. When we receive your return, it shall be inspected by our returns department and we will inform you of the outcome within 3-5 business days.
    We are not allowed to provide our personal contact information via eBay as per eBay’s policies.
    All communication must be done through eBay. Please follow eBay’s Policies and the channels that they provide. In the unlikely event that you have a grievance or if you have a query, prior to escalating the matter; we would greatly appreciate that you make contact with us through eBay, so that we can try to attend to and resolve your query as fast and efficiently as possible.
    Important Shipping Notice: If you have made a purchase but wish to cancel the purchase, please inform us as quickly as possible. In most cases, we ship within the same day that the part is purchased. Couriers do not collect over weekends – any purchase made after mid-day on Friday may only ship on Monday. We generally do not accept a change of delivery address to the one specified on the buyers account profile. However, if we decide to and only at our own discretion, agree to ship to a different address as per a buyers request, under no circumstance shall we accept responsibility for the part “not arriving” at the new address provided by the buyer.

Contact us

  • We try to make sure you have a pleasant shopping experience, so that we can do more business with you.
  • If there is any dissatisfaction, please email us instead of leaving any 1 or 2 ratings, negative feedback or open any ebay or paypal dispute.
  • We believe we try our best to resolve the issues. Please give us the opportunity to resolve any problem.
  • You may contact us by ‘Ask a question’.

Additional information

Weight 1,871067 lbs
Brand

DANA SPICER

Country of Origin

United States

Condition

New

Reviews

There are no reviews yet.

Be the first to review “1350 PINION YOKE STRAP STYLE DANA 44 TJ YJ XJ CJ JEEP OEM SPICER PART”

Your email address will not be published. Required fields are marked *

57-1583
$5,62
57-1909
$195,73
57-1748
$54,46